[Top] [All Lists]

Re: Xfs partition info seems to be lost on reboot

To: Melissa Terwilliger <techess@xxxxxxxxx>
Subject: Re: Xfs partition info seems to be lost on reboot
From: Jan Derfinak <ja@xxxxxxxxxxxx>
Date: Thu, 11 Nov 2004 20:07:01 +0100 (CET)
Cc: linux-xfs@xxxxxxxxxxx
In-reply-to: <BDB8DF2A.230B%techess@xxxxxxxxx>
References: <BDB8DF2A.230B%techess@xxxxxxxxx>
Sender: linux-xfs-bounce@xxxxxxxxxxx
On Thu, 11 Nov 2004, Melissa Terwilliger wrote:

> zcat /proc/config.gz | grep CONFIG_LBD
> So I do have that set.  Should I have that unset do you think?

I think that there is no difference on 64-bit system. You can leave it on.
I propose to use original SLES9 kernel if it is possible. It is well tested
and approved by many companies.

> >Is there possibility that parted changes only kernel idea about partition
> >table but not real disk layout? Did you try fdisk?
> I have not used fdisk because I was told that it would work properly on
> disks over 2TB, the 3ware company suggested parted instead.
> We have two identical machines setup.  I think I'm going to Try RedHat WS3
> and see if I have a similar problem there.  It might just be a problem with
> the 3Ware card or drivers.

Simplest thing you can do is to use fdisk and also look to
/proc/partitions before/after reboot like Eric mentioned. Please tell me if
there is any diffence if you use fdisk or SLES9 kernel.



<Prev in Thread] Current Thread [Next in Thread>