On Thursday 03 February 2005 16:15, Steve Lord wrote:
The bit about setting the values twice should not be necessary, I
think that endian bug should be ancient history.
You may need to run xfs_repair before mount will work nowadays too,
try it and see.
Yup - This is fixed:
xfs_db> write logblocks 8750
logblocks = 8750
Actually the move works, I am able to move the log from internal to
external and back again. - And able to mount the filesystem in both
cituations, but xfs_repair doesen't agree. When running xfs_repair on the
filesystem after I have moved the log to an external device the following
st3:~# xfs_repair -L -l /dev/sda4 /dev/sdc1
Phase 1 - find and verify superblock...
fatal error -- could not read superblock